Motorola WiNG 5 System Reference Manual page 445

5.0 GHz Channel
Switch Delta
2.4 GHz Channel
Switch Delta
21.Select OK to update the Smart RF Interference Recovery settings. Select
configuration.
Use the spinner to set a channel switch delta (between 5 - 35 dBm) for the
5.0 GHz radio. This parameter is the difference between noise levels on the
current channel and a prospective channel. If the difference is below the
configured threshold, the channel will not change. The default setting is 20
dBm.
Use the spinner to set a channel switch delta (between 5 - 35 dBm) for the
2.4 GHz radio. This parameter is the difference between noise levels on the
current channel and a prospective channel. If the difference is below the
configured threshold, the channel will not change. The default setting is 20
dBm.
Wireless Configuration 6 - 97
Reset to revert to the last saved