Motorola WiNG 5 System Reference Manual page 374

6 - 26 WiNG 5 Access Point System Reference Guide
5. Configure the following WEP 128 or Keyguard settings:
Generate Keys
Keys 1-4
Restore Default
WEP Keys
Default WEP 128 or Keyguard keys are as follows:
• Key 1 101112131415161718191A1B1C
• Key 2 202122232425262728292A2B2C
• Key 3 303132333435363738393A3B3C
• Key 4 404142434445464748494A4B4C
Figure 6-8 WEP 128 screen
Specify a 4 to 32 character Pass Key and select the
pass key can be any alphanumeric string. The access point, other
proprietary routers, and Motorola Solutions Solutions clients use the
algorithm to convert an ASCII string to the same hexadecimal number.
Clients without Motorola Solutions Solutions adapters need to use WEP
keys manually configured as hexadecimal numbers.
Use the Key #1-4 areas to specify key numbers. For WEP 128 (104-bit key),
the keys are 26 hexadecimal characters in length. Select one of these keys
for default activation by clicking its radio button.
If you feel it necessary to restore the WEP algorithm back to its default
settings, select the Restore Default WEP Keys
Generate button. The
button.