Table of Contents
Advertisement
7. Refer to the
Events E-mail Notification
the access point profile.
SMTP Server
Port of SMTP
Sender E-mail Address
Username for SMTP
Server
Password for SMTP
Server
8. Use the
Persist Configuration Across Reloads
configuration received from its connected Virtual Controller. Stored configurations can be made available to the access
point if the access point's connected Virtual Controller were to be unreachable. Options include Enabled, Disabled and
Secure.
9. Select
OK
to save the changes made to the profile's Management Settings. Select
configuration.
10. Select
Firmware
from the Management menu.
field to define how system event notification e-mails are sent on behalf of
Specify either the Hostname or IP Address of the outgoing SMTP server
where notification e-mails are originated.
If a non-standard SMTP port is used on the outgoing SMTP server, select
this option and specify a port between 1 - 65,535 for the outgoing SMTP
server.
Specify the e-mail address where notification e-mails are originated.
Specify the sender's username on the outgoing SMTP server. Many SMTP
servers require users to authenticate with a username and password before
sending e-mail through the server.
Specify the sender's username password on the outgoing SMTP server.
Many SMTP servers require users to authenticate with a username and
password before sending e-mail through the server.
option to define how the access point saves (in flash memory) the
Device Configuration 5 - 139
Reset
to revert to the last saved
Hide quick links:
Advertisement
Table of Contents
