Motorola WiNG 5 System Reference Manual page 131

DHCP Client Default
Route Priority
Enable Routing Failure
10. Select the OK button located at the bottom right of the screen to save the changes. Select
saved configuration.
Use the spinner control to set the priority value (1 - 8,000) for the default
route learnt from the DHCP client. The default setting is 1000.
When selected, all default gateways are monitored for activity. The system
will failover to a live gateway if the current gateway becomes unusable. This
feature is enabled by default.
Device Configuration 5 - 71
Reset to revert to the last