Table of Contents
Advertisement
RF Mode
Channel
Transmit Power
6. If required, select a radio configuration and select the
The
Radio Settings
tab displays by default.
7. Define the following radio configuration parameters from within the
Description
Admin Status
Displays whether each listed radio is operating in the 802.11a/n or
802.11b/g/n radio band. If the radio is a dedicated sensor, it will be listed as a
sensor to define the radio as not providing typical WLAN support. The radio
band is set from within the Radio Settings tab.
Lists the channel setting for the radio. Smart is the default setting. If set to
smart, the access point scans non-overlapping channels listening for beacons
from other access points. After the channels are scanned, it selects the
channel with the fewest access points. In the case of multiple access points
on the same channel, it will select the channel with the lowest average power
level.
Lists the transmit power for each radio. The column displays smart if set for
dynamic Smart RF support.
Edit
Figure 5-17 Access Point Radio - Radio Settings tab
Provide or edit a description (1 - 64 characters in length) for the radio that helps
differentiate it from others with similar configurations.
Either select the Disabled or Enabled radio button to define this radio's current
status within the network. When defined as Enabled, the access point is
operational and available for client support.
Device Configuration 5 - 33
button to modify the radio configuration.
Properties
field:
Hide quick links:
Advertisement
Table of Contents
