Using The Initial Setup Wizard - Motorola WiNG 5 System Reference Manual

3 - 2 WiNG 5 Access Point System Reference Guide

3.1 Using the Initial Setup Wizard

Once the access point is installed and powered on, complete the following steps to get the access point up and
running and access management functions:
1. Point the Web browser to the access point's IP address. The following login screen displays:
2. Enter the default username admin in the
3. Enter the default password motorola in the
4. Click the Login button to load the management interface.
Figure 3-1 Web UI Login Screen
Username
NOTE: When logging in for the first time, you're prompted to change the password to
enhance device security in subsequent logins.
NOTE: If you get disconnected when running the wizard, you can connect again with the
access point's actual IP address (once obtained) and resume the wizard.
field.
Password field.