Motorola WiNG 5 System Reference Manual page 200

5 - 140 WiNG 5 Access Point System Reference Guide
11. Refer to the
DHCP:
Configuration Update
Firmware Update
12. Use the parameters within the
firmware configuration.
Select AP Type(s) for
Auto Upgrade
Figure 5-79 Profile Management Firmware screen
Auto Install via DHCP field to define the configuration used by the profile to update firmware using
Select this option to enable automatic configuration file updates for the
profile from a location external to the access point. If enabled (the setting
is disabled by default), provide a complete path to the target configuration
file used in the update. To use this option, first create a Virtual Interface in
the Interfaces section and enable the Use DHCP to Obtain Gateway/DNS
Servers option for that Virtual Interface.
Select this option to enable automatic firmware updates (for this profile)
from a location external to the access point. To use this option, first create
a Virtual Interface in the Interfaces section and enable the Use DHCP to
obtain Gateway / DNS Servers option for that Virtual Interface. This value
is disabled by default. For information on upgrading an AP-6532 from
firmware version 5.1, refer to
page 5-142.
Automatic Adopted AP Firmware
Select the access point model to upgrade to a newer firmware version
using its associated Virtual Controller AP's most recent firmware file for
that model.
Upgrading AP-6532 Firmware from 5.1 on
Upgrade field to define an automatic