Name; Switchport Protected-Port - Cisco 300 Series Cli Manual

Virtual Local Area Network (VLAN) Commands
OL-32830-01 Command Line Interface Reference Guide

56.8 name

Use the name Interface Configuration (VLAN) mode command to name a VLAN.
Use the no form of this command to remove the VLAN name.
Syntax
string
name
no name
Parameters
•
string
—Specifies a unique name associated with this VLAN. (Length: 1–32
characters).
Default Configuration
No name is defined.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
The VLAN name must be unique.
Example
The following example assigns VLAN 19 the name Marketing.
switchxxxxxx(config)#
switchxxxxxx(config-if)#

56.9 switchport protected-port

Use the switchport protected-port Interface Configuration mode command to
isolate Unicast, Multicast, and Broadcast traffic at Layer 2 from other protected
ports on the same switch. Use the no form of this command to disable protection
on the port.
Syntax
switchport protected-port
19
interface vlan
Marketing
name
56
1058