Voice Vlan Aging-Timeout - Cisco 300 Series Cli Manual

57
1107
no voice vlan cos
Parameters
•
cos
cos —Specifies the voice VLAN Class of Service value. (Range: 0–7)
•
remark—(Optional) Specifies that the L2 user priority is remarked with the
CoS value.
Default Configuration
The default CoS value is 5.
The L2 user priority is not remarked by default.
Command Mode
Global Configuration mode
Example
The following example sets the OUI voice VLAN CoS to 7 and does not do
remarking.
switchxxxxxx(config)# voice vlan cos

57.11 voice vlan aging-timeout

To set the OUI Voice VLAN aging timeout interval, use the voice vlan aging-timeout
Global Configuration mode command. To restore the default configuration, use the
no form of this command.
Syntax
voice vlan aging-timeout
no voice vlan aging-timeout
Parameters
aging-timeout minutes
minutes. (Range: 1–43200).
7
minutes
—Specifies the voice VLAN aging timeout interval in
OL-32830-01 Command Line Interface Reference Guide
Voice VLAN Commands