Cisco 300 Series Cli Manual page 1078

Virtual Local Area Network (VLAN) Commands
OL-32830-01 Command Line Interface Reference Guide
Port Mode: Trunk
Ingress UnTagged VLAN(NATIVE): 2
Gvrp Status: disabled4
Protected: Enabled, Uplink is gi14.
802.1x state: single-host mode, authorized, PVID is changed to Radius assigned
VLAN_ID
Port gi11 is member in:
VLAN Name
---- ----------
1 default
8 8
11 11
19 IPv6VLAN
72 72
120
Forbidden VLANS:
VLAN Name
---- ---------
73 Out
Classification rules:
Mac-based VLANs:
Group ID Vlan ID
Example 2—The following example displays the command output for an access
port:
switchxxxxxx#
show interfaces switchport gi12
Port gi12:
Port Mode: Access
Ingress UnTagged VLAN (NATIVE): 1
Gvrp Status: disabled
Protected: Disabled
Egress Rule Type
----------- -----
untagged Default
tagged Dynamic
tagged Static
untagged Static
untagged Static
untagged RADIUS Assigned VLAN
56
1078