Show Interfaces Switchport - Cisco 300 Series Cli Manual

56
1077
•
If the native VLAN of a trunk port is 4095 when the port is removed from the
default VLAN (as a tagged), the native VLAN is set by the system to the
default VLAN.
•
The PVID of a general port is not changed when the port is removed from
the default VLAN (as a tagged). If the PVID is the default VLAN, the port is
added by the system to the default VLAN as an untagged.
Example
The following example configures the port gi 1 1 as a tagged port in the default
VLAN.
switchxxxxxx(config)#
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#

56.27 show interfaces switchport

Use the show interfaces switchport Privileged EXEC command to display the
administrative and operational status of all interfaces or a specific interface.
Syntax
show interfaces switchport [
Parameters
•
interface-id
—Specify an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
Default Configuration
Displays information for all interfaces.
Command Mode
User EXEC mode
Examples
Example 1—The following example displays the command output for a trunk port:
switchxxxxxx# show interfaces switchport gi11
Port gi11:
Virtual Local Area Network (VLAN) Commands
interface gi11
switchport mode trunk
switchport default-vlan tagged
interface-id ]
OL-32830-01 Command Line Interface Reference Guide