Exit (Exec); Help - Cisco 300 Series Cli Manual

User Interface Commands
OL-32830-01 Command Line Interface Reference Guide
Examples
The following examples change the configuration mode from Interface
Configuration mode to Privileged EXEC mode.
switchxxxxxx(config-if)# exit
switchxxxxxx(config)# exit

55.9 exit (EXEC)

To close an active terminal session by logging off the device, use the exit User
EXEC mode command.
Syntax
exit
Parameters
This command has no arguments or keywords
Default Configuration
None
Command Mode
User EXEC mode
Example
The following example closes an active terminal session.
switchxxxxxx# exit

55.10 help

To display a brief description of the Help system, use the help command.
55
1040