Cisco 300 Series Cli Manual page 1092

Voice VLAN Commands
OL-32830-01 Command Line Interface Reference Guide
Using this command with the type parameter displays the voice VLAN parameters
relevant to the type selected. The the local and agreed voice VLAN settings are
displayed only if this is the current voice VLAN state.
The interface-id parameter is relevant only for the OUI VLAN type.
Examples
The following examples display the output of this command in various
configurations.
Example 1—Displays the auto voice VLAN parameters (this is independent of the
voice VLAN state actually enabled).
switch>show voice vlan type auto
switchxxxxxx# show voice vlan type auto
Best Local Voice VLAN-ID is 5
Best Local VPT is 5 (default)
Best Local DSCP is 46 (default)
Agreed Voice VLAN is received from switch 00:24:01:30:10:00
Agreed Voice VLAN priority is
Agreed Voice VLAN-ID is 5
Agreed VPT is 5
Agreed DSCP is 46
Agreed Voice VLAN Last Change is 11-Jul-11 15:52:51
switchxxxxxx#
Example 2—Displays the current voice VLAN parameters when the voice VLAN state
is auto-enabled.
switch>show voice vlan
Administrate Voice VLAN state is auto-enabled on IPv4
Operational Voice VLAN state is auto-enabled
Best Local Voice VLAN-ID is 5
Best Local VPT is 5 (default)
Best Local DSCP is 46 (default)
Agreed Voice VLAN is received from switch 00:24:01:30:10:00
0 (active static source)
57
1092