Show System Id - Cisco 300 Series Cli Manual

System Management Commands
OL-32830-01 Command Line Interface Reference Guide
Unit Sensor Temperature(c)
Status
--- --------- --------------
1 OK 37
2 Failure
3 OK 68
Example 4: For systems with multiple sensor statuses
Unit/ Sensor Temperature(c)
Sensor Status
--- --------- --------------
1/1 OK 37
1/2 Failure
2/1 OK 68

50.22 show system id

To display the system identity information, use the show system id EXEC mode
command.
Syntax
show system id
Command Mode
User EXEC mode
Example
The following example displays the system identity information.
switchxxxxxx> show system id
serial number 114
Alarm
Temp(C)
-------
60
60
65
50
992