Cisco 300 Series Cli Manual page 1015

52
1015
Parameters
•
username username
1–48 characters)
•
fingerprint {bubble-babble | hex}—Specifies the fingerprint display format.
The possible values are:
-
bubble-babble—Specifies that the fingerprint is displayed in Bubble
Babble format.
-
hex—Specifies that the fingerprint is displayed in hexadecimal format.
Default Configuration
The default fingerprint format is hexadecimal.
Command Mode
Privileged EXEC mode
Example
The following examples display SSH public keys stored on the device.
switchxxxxxx# show crypto key pubkey-chain ssh
Username Fingerprint
----------- ----------------------------------------------------------
9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86
bob
john 98:F7:6E:28:F2:79:87:C8:18:F8:88:CC:F8:89:87:C8
switchxxxxxx#
show crypto key pubkey-chain ssh username
Username Fingerprint
----------- ----------------------------------------------------------
bob 9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86
Telnet, Secure Shell (SSH) and Secure Login (Slogin) Commands
—Specifies the remote SSH client username. (Length:
OL-32830-01 Command Line Interface Reference Guide
bob