Show Interfaces Description - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show interfaces description

To display a description and status of an interface, use the show interfaces description command.
Syntax Description
interface
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples This example shows how to display information for all interfaces:
Switch# show interfaces description
Interface Status
PO0/0
PO0/1
Gi1/1
Switch#
Related Commands Command
description (refer to Cisco IOS
documentation)
OL-27596 -01
show interfaces [interface] description
(Optional) Type of interface.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Protocol Description
admin down down
admin down down
up up
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
First interface
GigE to server farm
Description
Includes a specific description about the digital signal
processor (DSP) interface.
show interfaces description
2-717