Power; Power Savings; Resume On Time; Resume Time - Micros Systems Eclipse Setup Manual

Power

This menu provides access to the Eclipse System Board power saving features. Power
savings are disabled by default.
Power Savings: [Disabled]
When set to [Disabled], power management features are turned off and will not
function regardless of the other settings in this menu.
[Disabled] - Turns off all power management features. This setting is
recommended for most applications.
[Maximum Performance] - This selection conserves less power, but allows the
workstation to return to an operational state in the least amount of time. When
enabled, the [Standby Timeout] field is set to 16 minutes and the [Auto Suspend
Timeout] field is set to 60 minutes.
[Maximum Power Savings] - This selection provides the greatest amount of
power savings but the workstation will take longer to return to an operational
state. When enabled, the [Auto Suspend Timeout] field is set to 5 minutes.
[Customized] - Allows the user to define the Standby Timeout and Auto Suspend
Timeout intervals. When Customized is selected, you must enter timeout values
for the fields listed below.
[Standby Timeout]
The available selections are off, 2, 4, 6, 8, 12, or 16 minutes. After the
designated time has elapsed, Standby Mode turns off various devices in the
system, including the screen, until you start using the system again (by
moving the mouse or using the keyboard).
[Auto Suspend Timeout]
Determines the amount of time the workstation must be in Standby Mode (see
above) before it enters the Suspend mode. The available selections are off, 5,
10, 15, 20, 30, 40, and 60 minutes.
Resume On Time: [Off]
This selection wakes the system at a specified time. The available selections are [Off]
and [On]. When [On], the wake up time is specified in the Resume Time: field, below.

Resume Time: [00:00:00]

Then the Resume On Time field is enabled, enter the time when the workstation
should resume operation in 24 hour format.
Resume On Modem Ring: [Off]
When set to [Enabled] can power up the workstation from the Suspend state when an
external modem receives a call.
PCWS Eclipse Setup Guide
BIOS Setup Utility

Power

2-11