Care And Handling; Environmental Requirements; Location; Foreign Materials - Micros Systems Eclipse Setup Manual

Care and Handling

The following pages offer tips for placing the workstation in an environmentally safe
location and tips for cleaning the workstation cabinet and touchscreen.

Environmental Requirements

To ensure proper operation of the equipment, consider the following guidelines for
placement of the Eclipse PC Workstation.
Dimensional data for the workstation and peripheral printers can be found in
Appendix A of this manual. Before you decide on the space each device should
occupy, take measurements and compare them to ours.

Location

Tile is the recommended floor surface for areas surrounding the workstation. If the
floor covering adjacent to the equipment is carpeted, an anti-static grade is
recommended. If the carpeting surrounding the area containing the equipment is not
composed of anti-static material, the use of static-discharge mats should be
considered. The recommended type of anti-static mat is one that incorporates a
grounding clip with a cable to provide a discharge path to ground.

Foreign Materials

PCWS Eclipse Setup Guide
WARNING:
Do not use sharp objects such as a pen or pencil to press keys
on the touchscreen as this could damage the sensing layer.
Liquid spillage can cause damage to the circuits in the unit. Do
not place the equipment near food preparation areas, dish
racks, or water stations. The Eclipse LCD head includes a
gasket seal around the touchscreen which may afford some
protection from liquid spillage.
If any type of liquid is spilled onto the touchscreen or on the
top of the unit, turn off power as quickly as possible by
removing the AC power cord from the wall plate. Do not
reconnect the AC power cord to an outlet until it has been
determined that no spillage remains inside the unit.
What Is The Eclipse Workstation?
Care and Handling
1-11