Starting the Phoenix Setup Utility/Checking the MICROS BIOS Version
Boot
This menu allows the user to determine the Eclipse boot device sequence. The boot
device may be an external USB Floppy Disk Drive, internal IDE hard disk, network
boot ROM, or optional Disk On Chip.
Exit
You may save your changes and exit, discard your changes, or load default setup
values from this menu.
Keys Used During Setup
The table below summarizes the function of the keys that appear on the bottom of the
Setup Utility help screen.
Key(s)
[F1]
[ESC]
<- or ->
Up or Dn
[-] minus key
[Shft]+[+] or
Space
[F5]
[F6]
[Enter]
[Home] or
[PgUp]
[End] or
[PgDn]
[F9]
[F10]
PCWS Eclipse Setup Guide
Description
Display general help from any screen in the
Setup Utility
Jumps to the Exit Saving Changes field from
any screen in the Setup Utility
Selects a menu item to the left or right
Moves the highlight field up or down or
between fields
Scrolls backwards through values for the
highlighted field
Scrolls forward through values for the
highlighted field
Scrolls backward through values for the
highlighted field. Same as [-].
Scrolls forward through values for the
highlighted field. [Shift]+[+] or Space
Enters sub-menu, or brings up a selection
menu for the highlighted field
Moves the cursor to the first field
Moves the cursor to the last field
Load Setup Defaults from any screen in the
Setup Utility
Save changes and Exit from any screen in the
Setup Utility
BIOS Setup Utility
2-3
Need help?
Do you have a question about the Eclipse and is the answer not in the manual?