Micros Systems Eclipse Setup Manual page 94

PCWS Eclipse Hardware Configuration
Re-assembling the Eclipse
5.
Attach the front cover to the case and fasten the two thumbscrews as shown in
Figure 3-63.
Figure 3-63: Attaching the Front Cover Thumbscrews
3-44
WARNING
If AC power must be promptly removed from the Eclipse in the
event of spillage or malfunction, always remove the AC power
cord from the wall outlet, not the Eclipse system unit.
CAUTION:
For use in any European Union country, the Eclipse must be
connected to an external AC surge suppressor or to a power
conditioner with AC surge suppression capabilities. Installation
of the Eclipse without a surge suppressor that meets the
EN55024 requirements will invalidate its CE mark approval.
PCWS Eclipse Setup Guide