Pc Beep Mute; After Power Failure (Bios Version 1.00.20 Or Later); Lan Boot Function; System Memory - Micros Systems Eclipse Setup Manual

BIOS Setup Utility
Main
The Eclipse does not support a secondary IDE master or slave device. A connector is
not provided on the system board. The BIOS does not enable this interface and assigns
IRQ 15 to COM3.
PC Beep Mute [Disabled]
This setting determines if the beeper located on the system board functions during the
Power On Self Test. The default setting of disabled allows the internal beeper to sound
during POST.
Selecting [Enabled] mutes the internal beeper. The external speakers are not affected
by these settings.
After Power Failure [Stay Off] (BIOS Version 1.00.20 or later)
This field determines how the Eclipse recovers from an unexpected AC power failure
while in operation. The selections are [Stay Off], [Power On], and [Last State].
The default setting of [Stay Off] requires the user to press the power button to restart
the workstation after an unexpected AC power failure.
The [Power On] setting causes the Eclipse to automatically restart when AC power
returns after an unexpected AC power failure.
The [Last State] setting should be used in conjunction with the power saving modes. If
the Eclipse is in a sleep mode and AC power fails, when it returns, the workstation
should resume the sleep mode state it was in before the AC power failed.
LAN Boot Function: [Disabled]
The ability of the Eclipse to boot from a LAN or from the Disk On Chip is mutually
exclusive. Thus, if a Disk On Chip is installed, and you must boot from the LAN, set
this field to [Enabled].

System Memory

Extended Memory

These fields are for informational purposes only. The size of "System Memory" will
typically be 640K. The size of "Extended Memory" field is determined by the number
and size of DIMMs installed on the system board. The sum of the System Memory
and Extended Memory fields minus the 1M the BIOS reserves for video will roughly
equal the total amount of DIMMs installed on the system board.
2-6 PCWS Eclipse Setup Guide