Setting The Reports Options; Maintenance - Xerox 770 Digital Color Press System Administration Manual

System Settings > Common Service Settings
2 Sided Report
When printing a report, select whether to print a 1-sided or 2-sided report.

Setting the Reports options

1. Login as administrator.
2. Access the Tools tab on the UI.
3. Select System Settings > Common Service Settings.
4. Select Reports.
5. Select the item to be set or changed.
6. Select Change Settings.
7. Select the desired setting for the option.
8. Select Save.
The Reports screen is displayed.
9. If desired, select another option to set or change and repeat the previous steps.
10. Select Close.
The main Tools tab screen is displayed.
11. Exit administrator mode.

Maintenance

Use this feature to further customize the machine settings for the following options:
Initialize Hard Disk
Use this option to initialize the machine hard disk. This erases any current data on the
hard disk.
Delete All Data
Use this option to select Delete Job or Run Job when the machine memory is full.
Software Options
This feature is for service representatives only. For more information, contact the Xerox
Customer Support Center.
NVM Read Write
The Xerox service representative uses this feature to change certain system settings.
It also may occasionally be used by system administrators.
Alignment Adjustment
Use this feature to configure the default settings for each of the Alignment Adjustment
options.
Adjust Paper Curl
Use this feature to change the paper curl settings either at point of need or to create
individual paper curl profiles for specific paper types, weights, and trays.
2-28 ®
Xerox 770 Digital Color Press
System Administration Guide