Step 2 Entering The Quantity; Step 3 Scanning The Original - Xerox 6204 User Manual

Step 2 Entering the Quantity

You can enter up to 99 copies as the quantity.
1
Enter the number of copies using the numeric
keypad.
The number of copies entered appears on the upper right
area of the touch screen.
2
If you enter an incorrect value, press the <C>
button to clear the entry, and enter the correct
value.

Step 3 Scanning the Original

To scan the original, follow the procedure below.
Important • The original may jam if pressure is applied to the top of the original or it is pulled during
1
Align the original with the original guide face
down, and insert the lead edge of the original
into the machine until it stops feeding. Then the
machine starts scanning automatically.
Important • Hold the original down flat with two hands (one
Xerox 6204 Wide Format Solution
scanning.
• When originals that contain holes are loaded, make sure that the area with the holes is fed in
last, because the original may jam if the area with the holes is fed in first.
• If the scan start mode has been set to [Manual
Start], press the <Start> button.
on either side of the arrow in the graphic) while
it is being fed in to the starting position
(to avoid minor "crinkles" that can cause dark
areas in the copy). If you release the original
before it stops feeding, it may result in a jam.
Copying Procedure
Copy from
Memory
Transmitting
Copy Scan Menu
Jobs in Memory
Original/
Media Settings
1
2 3
Interrupt
Machine Status 4 5 6
7 8 9
Log In/Out
.
0 C
Numeric keypad
Ready to copy
Basic Copy Image Quality
Reduce / Enlarge Media Supply Media Type
Auto
100.0%
Select
1 A0
Auto %
Bond
50.0% 2 A1
A0 A2 Bond
More... More...
Copy from
Transmitting
Menu
Copy Scan
Jobs in Memory
Original/
Media Settings
1
2 3
Interrupt
Machine Status 4 5 6
7 8 9
Log In/Out
.
0 C
<C> button
riginal Guide
Power Saver
Clear All
Stop
Start
1
Qty.
More Features
Bond
Vellum
Film
3
Media Cut Mode
Standard
Memory
Power Saver
Clear All
Stop
Start
43