Network Port Usage; Table 14-5: Default Tcp/Udp Network Port Numbers - AudioCodes Mediant 1000 User Manual

14.6

Network Port Usage

The following table lists the default TCP/UDP network port numbers used by the Mediant
1000. Where relevant, the table lists the ini file parameters that control the port usage and
provide source IP address filtering capabilities.

Table 14-5: Default TCP/UDP Network Port Numbers

Port Number
2 2
23 -
68 67
80 -
161 -
443 -
500 -
6000, 6010 and up -
6001, 6011 and up -
6002, 6012 and up -
5060 5060
5061 5061
(random) > 32767 514
(random) > 32767 -
(random) > 32767 -
(random) > 32767 162
(random) > 32767 -
SIP User's Manual
Peer Application
Port
Debugging interface
Telnet
DHCP
Web server (HTTP)
SNMP GET/SET
Web server (HTTPS)
IPSec IKE
RTP traffic
RTCP traffic
T.38 traffic
SIP
SIP over TLS (SIPS)
Syslog
Syslog ICMP
ARP listener
SNMP Traps
DNS client
Always ignored
Disabled by default (TelnetServerEnable).
Configurable (TelnetServerPort), access
controlled by WebAccessList
Active only if DHCPEnable = 1
Configurable (HTTPPort), can be disabled
(DisableWebTask or HTTPSOnly). Access
controlled by WebAccessList
Configurable (SNMPPort), can be disabled
(DisableSNMP). Access controlled by
SNMPTrustedMGR
Configurable (HTTPSPort), can be disabled
(DisableWebTask). Access controlled by
WebAccessList
Can be disabled (EnableIPSec)
Base port number configurable
(BaseUDPPort), fixed increments of 10. The
number of ports used depends on the channel
capacity of the device.
Always adjacent to the RTP port number
Always adjacent to the RTCP port number
Configurable (LocalSIPPort [UDP],
TCPLocalSIPPort [TCP]).
Configurable (TLSLocalSIPPort)
Disabled by default (EnableSyslog).
Disabled by default (EnableSyslog).
Can be disabled (DisableSNMP)
362
Mediant 1000
Notes
Document #: LTRT-83301