Changing The Mediant 2000 Username And Password; Figure 4-1: Change Password Screen In Administrator Mode - AudioCodes Mediant 2000 Installation Manual

Voip media gateway
Hide thumbs Also See for Mediant 2000:
Table of Contents

Advertisement

4
Changing the Mediant 2000 Username and
Password
To prevent unauthorized access to the Embedded Web Server, two levels of security are
available: Administrator and Monitoring. Each employs a different username and password.
Users can access the Embedded Web Server as either:
Administrator - all Web screens are read-write and can be modified (default username
'Admin', default password 'Admin').
Monitoring - all Web screens are read-only and cannot be modified. In addition, the following
screens cannot be accessed: 'Reset', 'Save Configuration', 'Software Upgrade Wizard', 'Load
Auxiliary Files', 'Configuration File' and 'Regional Settings'. The 'Change Password' screen
can only be used to change the monitoring password (default username 'User', default
password 'User').
It is recommended that you change the default username and password of the security mode you
use to access the Embedded Web Server.
To change the username and password, take these 5 step:
Access the Embedded Web Server (refer to Section
1.
Open the 'Change Password' screen (Advanced Configuration menu > Change
2.
Password); the 'Change Password' screen is displayed.

Figure 4-1: Change Password Screen in Administrator Mode

In the 'User Name' and 'New Password' fields, enter the new username and the new
3.
password respectively. Note that the username and password of both levels can be a
maximum of 19 case-sensitive characters.
In the 'Confirm Password' field, reenter the new password.
4.
To apply the new username and password to the Administrator level:
5.
Click the button Change Administrator Password; the new username and password are
applied and the 'Enter Network Password' screen appears, shown in
updated username and password in the 'Enter Network Password' screen.
To apply the new username and password to the Monitoring level:
Click the button Change Monitoring Password; the new username and password are
applied.
Mediant 2000
3.3
on page 19).
30
Mediant 2000
Figure 3-2.
Enter the
Document #: LTRT-70105

Advertisement

Table of Contents
loading

Table of Contents