Changing The Mediapack Username And Password; Figure 4-1: Web User Accounts Screen - AudioCodes MediaPack MP-11 Series Fast Track Manual

Fast Track Installation Guide
Note:
4 Changing the MediaPack Username
and Password
To prevent unauthorized access to the Embedded Web Server, two user accounts are available,
a primary and secondary. For detailed information on the user account mechanism, refer to the
MediaPack User's Manual.
It is recommended that you change the default username and password of the account you use
to access the Embedded Web Server.
To change the username and password, take these 3 steps:
Open the 'Web User Accounts' screen (Advanced Configuration menu > Security
1.
Settings > Web User Accounts option); the 'Web User Accounts' screen is displayed.
To change the username of an account, enter the new username in the field 'User Name'
2.
and click the button Change User Name; the new username is applied immediately and the
'Enter Network Password' screen appears (shown in
updated username in the 'Enter Network Password' screen. Note that the username can be
a maximum of 19 case-sensitive characters.
To change the password of an account, enter the current password in the field 'Current
3.
Password', the new password in the fields 'New Password' and 'Confirm New Password' and
click the button Change Password; the new password is applied immediately and the 'Enter
Network Password' screen appears (shown in
password in the 'Enter Network Password' screen. Note that the password can be a
maximum of 19 case-sensitive characters.
Version 4.8

4. Changing the MediaPack Username and Password

The following Sections from here, up to the end of this Fast Track Guide,
apply equally to MGCP, H.323 and SIP.

Figure 4-1: Web User Accounts Screen

25
Figure 3-2 on page 18). Enter the
Figure 3-2 on page 18). Enter the updated
March 2006