Changing The Mp-1Xx Username And Password; Figure 4-1: Change Password Screen - AudioCodes MP-1xx Fast Track Installation Manual

Fast Track Installation Guide
Note:
4 Changing the MP-1xx Username and
Password
To prevent unauthorized access to the MP-1xx, it is recommended that you change the username
and password (both are case-sensitive) that are used to access the Embedded Web Server.
To change the username and password, take these 6 steps:
Access the Embedded Web Server (refer to Section
1.
Open the 'Change Password' screen ( Advanced Configuration menu > Change
2.
Password ); the 'Change Password' screen is displayed.
In the 'User Name' and 'New Password' fields, enter the new username and the new
3.
password respectively. Note that the username and password can be a maximum of 7 case-
sensitive characters.
In the 'Confirm Password' field, reenter the new password.
4.
Click the Change Password button; the new username and password are applied and the
5.
'Enter Network Password' screen appears, shown in
Enter the updated username and password in the 'Enter Network Password' screen.
6.
Version 4.4
The following Sections from here, up to the end of this Fast Track Guide,
apply equally to MGCP, H.323 and SIP.

Figure 4-1: Change Password Screen

4. Changing the MP-1xx Username and Password

3.3 on page 21).
Figure 3-2
29
on page 21.
March 2005