Monitoring Channels - All Protocols; Figure 7-1: Trunk & Channel Status - AudioCodes Mediant 2000 Installation Manual

Fast Track Installation Guide
From this step on, routing the phones in the internal routing tables is similar in
Note:
SIP and H.323, therefore refer to Step 2 on page 16, until the reset in Step 5.
(Note that the equivalent of the Gatekeeper in H.323 is the Proxy in SIP.)
For detailed directions of operating under Web management control, refer to
Section 6.2 of the Mediant 2000/SIP User's Manual, Document #: LTRT-00725
Rev 001.
Use the "Advanced Configuration" and "Protocol Management" screens to modify
all other SIP parameters.
Now continue with Section 7 below, until the end of this guide.
7 Monitoring Channels – All Protocols
To monitor status & detail of all channels take these 2 steps:
Click the 'Status & Diagnostics' menu>'Channel Status'; the 'Channel Status'
1.
screen opens (Figure 7-1), the color-coding showing the Status of each
channel individually.
To view the status of a specific channel, click on it and the Specific Channel
2.
Status Details are displayed as shown in Figure 7-2 on page 20.
Version 4.2
Figure 7-1: Trunk & Channel Status
19
Monitoring Channels
February 2004