Table of Contents
Advertisement
3. Voice Gateway using Proxy Server
2.3
Enabling Remote Web-based Management from WAN
After you have accessed the device through the LAN interface for initial setup, you can enable Web
management access from the WAN interface.
To enable remote Web-based management (HTTP/S) from WAN:
1.
Open the WEB Settings page (Setup menu > Administration tab > Web & CLI folder > WEB
Settings).
2.
Allow WAN access:
•
For HTTP: From the 'Allow WAN access to HTTP' drop-down list, select Enable.
•
For HTTPS: From the 'Allow WAN access to HTTPS' drop-down list, select Enable.
Apply
3.
Click
3
Voice Gateway using Proxy Server
This example scenario describes how to route calls when the Voice Gateway is configured
to operate using a SIP proxy server and FXS ports (basic configuration).
Figure 3-1: Example of Voice Gateway using SIP Proxy and FXS Ports
3.1
WAN Interface Configuration
This section describes the WAN Interface configuration of the Voice Gateway.
To configure WAN IP address:
◼
Open the WAN Interface page (Setup menu > IP NETWORK tab > CORE ENTITIES folder >
WAN Interface).
and save to flash.
- 7 -
MP-5xx Analog VoIP Gateway
Advertisement
Table of Contents
