show ip rip interface brief
Use the show ip rip interface brief command in Privileged EXEC mode to
display general information for each RIP interface. For this command to
display successful results routing must be enabled per interface (i.e. ip rip).
Syntax
show ip rip interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays general information for each RIP interface.
console#show ip rip interface brief
Interface
IP Address
---------- ----------
vlan1
0.0.0.0
vlan2
0.0.0.0
split-horizon
Use the split-horizon command in Router RIP Configuration mode to set the
RIP split horizon mode. Use the no form of the command to return the mode
to the default value.
Syntax
split-horizon {none | simple | poison}
no split-horizon
1354
Routing Information Protocol Commands
Send
Receive
Version
Version
-------- ----------- --------- ----------
RIP-2
Both
RIP-2
Both
RIP
Link
Mode
State
Disable
Down
Disable
Down