switchport private-vlan
Use the switchport private-vlan command in Interface Configuration mode
to define a private VLAN association for an isolated or community port or a
mapping for a promiscuous port.
Use the no form of the command to remove the private VLAN association or
mapping from the interface.
Syntax
switchport private-vlan {host-association primary-vlan-id secondary-vlan-id
| mapping primary-vlan-id [add|remove] secondary-vlan-list}
no switchport private-vlan {host-association|mapping}
•
host-association—Defines VLAN associations for community or host
ports.
•
mapping—Defines the private VLAN mapping for promiscuous ports.
•
primary-vlan-id—Primary VLAN ID of a private VLAN.
secondary-vlan-id—Secondary (isolated or community) VLAN ID of a
•
private VLAN.
•
add—Associates the secondary VLAN with the primary one.
•
remove—Deletes the secondary VLANs from the primary VLAN
association.
•
secondary-vlan-list—A list of secondary VLANs to be mapped to a primary
VLAN.
Default Configuration
This command has no default association or mapping configuration.
Command Mode
Interface Configuration (physical or port-channel)
User Guidelines
This command has no user guidelines.
830
VLAN Commands