Vrrp Timers Learn - Dell Networking 2024 Reference Manual

Syntax
group
vrrp timers advertise
group
no vrrp timers advertise
group — The virtual router identifier. (Range: 1-255)
•
interval — The frequency at which an interface on the specified virtual
•
router sends a virtual router advertisement. (Range: 1-255 seconds)
Default Configuration
Interval
has a default value of 1.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the frequency at which the VLAN 15 virtual
router 5 sends a virtual router advertisement.
console(config-if-vlan15)#vrrp 5 timers advertise 10

vrrp timers learn

Use the vrrp timers learn command in Interface Configuration mode to
configure the router, when it is acting as backup virtual router for a Virtual
Router Redundancy Protocol (VRRP) group, to learn the advertisement
interval used by the master virtual router. Use the no form of the command to
prevent the router from learning the advertisement interval from the master
virtual router.
Syntax
group
vrrp timers learn
group
no vrrp timers learn
group — The virtual router identifier. (Range: 1-255)
•
interval
interval
Virtual Router Redundancy Protocol Commands
1373