Ipv6 Route; Ipv6 Nd Suppress-Ra - Dell Networking 2024 Reference Manual

ipv6 nd suppress-ra

Use the ipv6 nd suppress-ra command in Interface Configuration mode to
suppress router advertisement transmission on an interface.
Syntax
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Example
The following example suppresses router advertisement transmission.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd suppress-ra

ipv6 route

Use the ipv6 route command in Global Configuration mode to configure an
IPv6 static route. Use the no form of the command to remove a preference,
an individual next hop, or all next hops for a route. Using the no ipv6 route
distance form causes the system to use the system default administrative
distance.
Syntax
distance
ipv6 route
ipv6-prefix/prefix-length
ipv6 route
preference
address} [
{ipv6-address |
]
interface-type
IPv6 Routing Commands
ipv6-
1099