Example
The following example displays the multicast configuration settings such as
flags, timer settings, incoming and outgoing interfaces.
console#show ip mroute group 224.5.5.5 summary
console#show ip mroute group 224.5.5.5
show ip mroute source
Use the show ip mroute source command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
sourceipaddr
sourceipaddr
groupipaddr
or
|
pair value(s).
Syntax
sourceipaddr
show ip mroute source
{summary}
sourceipaddr — IP address of source.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
Use the summary option to summarize the information displayed.
Example
The following example displays multicast configuration settings.
console#show ip mroute source 10.1.1.1 summary
console#show ip mroute source 10.1.1.1 224.5.5.5
1156
Multicast Commands