Clear Logging - Dell Networking 2024 Reference Manual

<190> JAN 10 18:59:17 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 369 %% [CLI:----:EIA-232] Access level of user admin
has been set to 15
If enabled, the CLI command logger subsystem begins to log commands
immediately after the user is authenticated. After authentication, the CLI
generates an explicit message and invokes the command logger. The format of
the message at login is:
<189> JAN 10 18:58:56 10.27.21.22-2 CMDLOGGER[209809328]:
cmd_logger_api.c(83) 361 %% CLI:10.27.21.22:admin:User admin logged in
<190> JAN 10 18:58:56 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 362 %% [CLI:admin:10.27.21.22] User has successfully
logged in
The CLI command log subsystem also logs all user log out instances. The
format of the log message is:
<190> JAN 10 19:01:04 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 382 %% [CLI:admin:10.27.21.22] User has logged out
Commands in this Chapter
This chapter explains the following commands:

clear logging

clear logging file
description (Logging)
level
logging cli-command
logging
logging audit
logging buffered
logging console
–
clear logging
Use the clear logging command in Privileged EXEC mode to clear messages
from the internal logging buffer.
1648
Syslog Commands
logging facility
logging on
logging protocol
logging snmp
logging web-session
port
show logging
show logging file
show syslog-servers
terminal monitor