Dell Networking 2024 Reference Manual page 1207

Syntax
area-id
area virtual-link
seconds
[hello-interval
seconds
] [dead-interval
key-id
digest-key
area-id
no area virtual-link
[hello-interval] [retransmit-interval] [transmit-delay] [dead-interval]
[[authentication-key] | [message-digest-key]]
area-id —Identifies the OSPF stub area to configure. (Range: IP address or
•
decimal from 0-4294967295)
router-id —Valid IP address.
•
• authentication—Specifies authentication type.
• message-digest —Specifies that message-digest authentication is used.
• null—No authentication is used. Overrides password or message-digest
authentication if configured for the area.
• hello-interval
packets to the OSPF virtual interface. (Range: 1–65535)
• dead-interval
virtual interface on the virtual interface is assumed to be dead. (Range:
1–65535)
• retransmit-interval
retransmitting LSAs if no acknowledgement is received. (Range: 0–3600)
• transmit-delay
LSA before sending, based on the estimated time it takes to transmit from
the interface. (Range: 0–3600)
• md5—Use MD5 Encryption for an OSPF Virtual Link.
key —Authentication key for the specified interface. (Range: 8 bytes or less
•
if the authentication type is simple and 16 bytes or less if the type is
encrypt.)
key-id —Authentication key identifier for the authentication type encrypt.
•
(Range: 0–255)
router-id
[authentication [message-digest | null]]
] [retransmit-interval
seconds
] [[authentication-key
key
md5 ]]
router-id
seconds —Number of seconds to wait before sending hello
seconds —Number of seconds to wait before the OSPF
seconds —The number of seconds to wait between
seconds —Number of seconds to increment the age of the
seconds
[authentication [message-digest | null]]
OSPF Commands
] [transmit-delay
key
] | [message-
1207