Dell Networking 2024 Reference Manual page 949

User Guidelines
Use the show ip dhcp pool
parameters. The IPv4 address is conveyed in the SIADDR field of the DHCP
OFFER, DHCP ACK, DHCP INFORM ACK and DHCP BOOTREPLY
messages.
Example
console(config-dhcp-pool)#next-server 192.168.21.2
option
Use the option command in DHCP Pool Configuration mode to supply
arbitrary configuration information to a DHCP client. Use the no form of the
command to remove the option configuration. Use the
command to display pool configuration parameters.
Syntax
option code {ascii string1|hex[
address8]}
no option code
code —The DHCP TLV option code.
•
ascii string1 —An ASCII character string. Strings with embedded blanks
•
must be wholly contained in quotes.
hex string1 —A hexadecimal string containing the characters [0-9A-F].
•
The string should not begin with 0x. A hex string consists of two characters
which are parsed to fill a single byte. Multiple values are separated by
blanks.
ip-address1 —An IPv4 address in dotted decimal notation.
•
Default Configuration
There is no default option configured.
Command Mode
DHCP Pool Configuration mode
command to display pool configuration
string1...string8
DHCP Server and Relay Agent Commands
show ip dhcp pool
ip-address1...ip-
]|ip[
949