Dell Networking 2024 Reference Manual page 1736

Example
The following example displays how to reconfigure switch number "1" to an
identifier of "2."
console(config)#switch 1 renumber 2
telnet
Use the telnet command in Privileged EXEC mode to log into a host that
supports Telnet.
Syntax
ip-address
telnet {
ip-address —Valid IP address of the destination host.
•
hostname —Hostname of the destination host. (Range: 1–158 characters).
•
The command allows spaces in the host name when specified in double
quotes. For example, console(config)#snmp-server host
"host name"
port —A decimal TCP port number, or one of the keywords from the port
•
table in the user guidelines (see
keyword —One or more keywords from the keywords table in the user
•
guidelines (see
Keywords Table
Options
/debug
/line
/localecho
<cr>
port
1736
System Management Commands
hostname port
| } [
Keywords Table
Description
Enable telnet debugging mode.
Enable telnet linemode.
Enable telnet localecho.
Press ENTER to execute the command.
Enter the port number. Refer to the following table.
keyword1......
] [
Port Table below).
below).
]