Ipv6 Dhcp Pool - Dell Networking 2024 Reference Manual

no domain-name
domain — DHCPv6 domain name. (Range: 1–255 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
DHCPv6 pool can have multiple number of domain names with maximum of
8.
Example
The following example sets the DNS domain name "test", which is provided
to a DHCPv6 client by the DHCPv6 server.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#domain-name test
console(config-dhcp6s-pool)#no domain-name test

ipv6 dhcp pool

This capability requires the IPv6 DHCP service to be enabled. Use the service
dhcpv6 command to enable the DHCPv6 service. Use the ipv6 dhcp pool
command in Global Configuration mode to enter IPv6 DHCP Pool
Configuration mode. DHCPv6 pools are used to specify information for
DHCPv6 server to distribute to DHCPv6 clients. These pools are shared
between multiple interfaces over which DHCPv6 server capabilities are
configured.
Syntax
pool-name
ipv6 dhcp pool
no ipv6 dhcp pool
pool-name — DHCPv6 pool name. (Range: 1-31 characters)
•
domain
pool-name
DHCPv6 Commands
961