Dell Networking 2024 Reference Manual page 1720

Hide thumbs Also See for Networking 2024:

Table of Contents

---------------- ---------- ---------- ------------ ------------ -----------

Example – All Units in the Stack

This example displays information about all units in the stack.

console>show switch

Management Standby

--- ---------- --------- ------------- ------------- ------------- ---------

Example-Stacking Links Path

This command tracks the path a packet may take when traversing stacking

links. The command shows active paths only, not those that may be taken

after a stack failover or stack reconvergence.

console#show switch stack-ports stack-path 3 1

Packet-path from unit 3 to unit 1:

unit-3 port gi3/0/49 to unit-2

unit-2 port gi2/0/49 to unit-1

Example – Status Parameters for NSF

The show switch command is used to display which unit is the management

unit and which is the backup unit.

(nsf-stack) #show nsf

Administrative Status.......................... Enable

Operational Status............................. Enable

Last Startup Reason............................ Warm Auto-Restart

Time Since Last Restart........................ 0 days 16 hrs 52 mins 55 secs

Restart In Progress............................ No

Warm Restart Ready............................. Yes

Copy of Running Configuration to Backup Unit:

Status...................................... Stale

Time Since Last Copy........................ 0 days 4 hrs 53 mins 22 secs

System Management Commands

Configured Running

Speed (Gb/s) Status

Chapters

Table of Contents