on the server is 15, the user is given read-write permissions. Any other value is
read-only. If exec shell feature is not enabled on the server, the user is given
read-only permissions.
Commands in this Chapter
This chapter explains the following commands:
common-name
country
crypto certificate generate
crypto certificate import
crypto certificate request
duration
ip http port
ip http server
ip http secure-certificate
common-name
Use the common-name command in Crypto Certificate Generation or
Crypto Certificate Request mode to specify the common-name for the
switch.
Syntax
common-name
common-name —Specifies the fully qualified URL or IP address of the
•
switch. If left unspecified, this parameter defaults to the lowest IP address
of the switch (when the certificate is generated). (Range: 1–64)
Default Configuration
This command has no default configuration.
1770
Web Server Commands
common-name
ip http secure-port
ip http secure-server
key-generate
location
organization-unit
show crypto certificate mycertificate
show ip http server status
show ip http server secure status
state