Ip Http Server - Dell Networking 2024 Reference Manual

Syntax
port-number
ip http port
no ip http port
port-number — Port number on which the switch HTTP server listens for
•
connections.. (Range: 1025–65535)
Default Configuration
This default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
The HTTP TCP port should not be set to a value that might conflict with
other well-known protocol port numbers used on this switch.
Example
The following example shows how the http port number is configured to
10013.
console(config)#ip http port 10013

ip http server

Use the ip http server command in Global Configuration mode to enable the
switch to allow HTTP access to the switch. To disable this function use the
no form of this command.
Syntax
ip http server
no ip http server
Default Configuration
The default mode is enabled.
1776
Web Server Commands