Show Ipv6 Mroute Group - Dell Networking 2024 Reference Manual

console#show ipv6 mroute group FF43::5 summary
Source IP
--------------- --------------- -------- --------- --------- -------
*
2001::5

show ipv6 mroute group

Use the show ipv6 mroute group command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
groupipaddr
value.
Syntax
show ipv6 mroute group
groupipaddr — IP address of the multicast group.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 mroute group FF43::5 ?
<cr>
|
summary
1182
IPv6 Multicast Commands
Multicast Route Table Summary
Group IP Protocol IIF
FF43::5 PIMSM
FF43::5 PIMSM
groupipaddr
Press enter to execute the command.
Output filter options.
Display the IPV6 multicast routing table summary.
OIF
Vl11
Vl13
Vl12 Vl11
Vl13
[summary]
Expiry