Dell Networking 2024 Reference Manual page 1718

Parameter
Last Startup
Reason
Time Since Last
Restart
Restart in progress Whether a restart is in progress. A
Warm Restart
Ready
Status
1718
System Management Commands
Description
The type of activation that caused
the software to start the last time.
There are four options. "Power-On"
means that the switch rebooted.
This could have been caused by a
power cycle or an administrative
"Reload" command. "Administrative
Move" means that the administrator
issued a command for the stand-by
manager to take over. "Warm-Auto-
Restart" means that the primary
management card restarted due to a
failure, and the system executed a
nonstop forwarding failover. "Cold-
Auto-Restart" means that the
system switched from the active
manager to the backup manager and
was unable to maintain user data
traffic. This is usually caused by
multiple failures occurring close
together.
Time since the current management
card became the active management
card. For the backup manager, the
value is set to 0d 00:00:00
restart is not considered complete
until all hardware tables have been
fully reconciled.
Whether the initial full checkpoint
has finished
Whether the running configuration
on the backup unit includes all
changes made on the management
unit.
Range
Power-On
Administrative-
Move
Warm-Auto-
Restart
Cold-Auto-
Restart
Time Stamp
Yes or No
Yes or No
Current or Stale
Default
None
0d
00:00:00