Passwords Strength Minimum Character-Classes - Dell Networking 2024 Reference Manual

default is 0. A maximum of 0 means again disabling the restriction. Use the
no form of this command to reset the maximum repeated characters to the
default value.
Syntax
0-15
passwords strength max-limit repeated-characters
no passwords strength max-limit repeated-characters
Default Configuration
The default value is 0.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
Example
console(config)# passwords strength max-limit repeated-characters 3

passwords strength minimum character-classes

Use this command to enforce a minimum number of character classes that a
password should contain. Character classes are uppercase letters, lowercase
letters, numeric characters and special characters. The valid range is 0-4. The
default is 0. If a value of 0 is configured then no character class checking is
performed, i.e. for special characters, uppercase characters, lower-case
characters, etc. Use the no form of this command to reset the minimum
character-classes to the default value.
Syntax
0-4
passwords strength minimum character-classes
no passwords strength minimum character–classes
1514
Password Management Commands