Match Ip Address - Dell Networking 2024 Reference Manual

Syntax
ip routing
no ip routing
Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration mode
User Guidelines
Use the show ip brief
Example
The following example enables IPv4 and IPv6 routing for VLAN 15
console(config)#ip routing

match ip address

Use this command to specify IP address match criteria for a route map. Use
no
the form of this command to delete a match statement from a route map.
Syntax
match ip address
no match ip address [
• access-list-name —
name can be up to 31 characters in length.
Default Configuration
There is no default configuration for this command.
Command Mode
Route Map mode
1054
IP Routing Commands
command to determine if routing is enabled or disabled.
access-list-name
access-list-name
The access-list name that identifies the named IP ACLs. The
access-list-name
[
]
]