Example
console#show captive-portal configuration 1
CP ID..................................... 1
CP Name................................... cp1
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
Blocked Status............................ Not Blocked
Configured Locales........................ 1
Authenticated Users....................... 0
show captive-portal configuration interface
Use the show captive-portal configuration interface command to display
information about all interfaces assigned to a captive portal configuration or
about a specific interface assigned to a captive portal configuration.
Syntax
show captive-portal configuration
unit/slot/port| tengigabitethernet unit/slot/port | fortygigabitethernet
unit/slot/port}]
cp-id —Captive Portal ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Interface
--------- ---------------------------------------- ------------ ---------
Interface Description
cp-id
interface [{gigabitethernet
Captive Portal Commands
Operational
Block
Status
Status
1421