Ipv6 Mld Last-Member-Query-Count - Dell Networking 2024 Reference Manual

User Guidelines
This command has no user guidelines.
Example
console(config)#ipv6 host Dell 2001:DB8::/32

ipv6 mld last-member-query-count

The ipv6 mld last-member-query-count command sets the number of
listener-specific queries sent before the router assumes that there are no local
members on the interface. Use the "no" form of this command to set the last
member query count to the default.
Syntax
last-member-query-count
ipv6 mld last-member-query-count
no ipv6 mld last-member-query-count
last-member-query-count — Query count (Range: 1–20).
•
Default Configuration
The default last member query count is 2.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld last-member-query-count 5
1087
IPv6 Routing Commands