Dell Networking 2024 Reference Manual page 1544

alarmnumber —An alarm number that uniquely identifies the alarm entry.
•
(Range: 1-65536). Each entry defines a diagnostic sampler at a particular
interval for an object on the device.
variable —The MIB object to monitor. May be fully qualified or relative.
•
Only variables that resolve to an ASN.1 primitive type of INTEGER are
allowed.
interval —The interval in seconds over which the data is sampled and
•
compared with the rising and falling thresholds. (Range: 1– 2147483647.
The default is 1 second.)
• absolute—Specifies to use a fixed value for the threshold (Default value).
• delta—Specifies to use the difference between the current value and the
previous value.
rising-threshold
•
rising-event-index —Event to trigger when the rising threshold is crossed
•
(1–65535).
• falling-threshold-high
1)
falling-event-index —Event to trigger when the rising threshold is crossed
•
(1–65535).
•
startup {rising|falling|rising-falling]
first set to active. If the first sample after this entry is configured is greater than
or equal to the rising threshold and startup rising or startup rising-falling is
configured, a single rising event is generated. If the first sample after this entry
is configured is less than or equal to the falling threshold and startup falling or
startup rising-falling is configured then a single falling event is generated.
• string —
owner
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
1544
RMON Commands
value-64 —Rising threshold value (−(2
value-64 —Falling threshold value (−(2
Specify an owner for the alarm (string – no default).
—
The event that is sent when this entry is
63 63
) to 2 − 1)
63 63
) to 2 −