Dell Networking 2024 Reference Manual page 1630

engineid-string — Specifies the engine ID of the remote SNMP entity to
•
which the user belongs. The engine ID is a concatenated hexadecimal
string. Each byte in the hexadecimal character string is two hexadecimal
digits. The remote engine id designates the remote management station,
and should be defined to enable the device to receive acknowledgements
to "informs." (Range: 5-32 characters.)
• auth-md5 — The HMAC-MD5-96 authentication level.
• auth-sha — The HMAC-SHA-96 authentication level.
password — A password. (Range: 1 to 32 characters.)
•
• auth-md5-key — The HMAC-MD5-96 authentication level. Enter a
pregenerated MD5 key.
• auth-sha-key — The HMAC-SHA-96 authentication level. Enter a
pregenerated SHA key.
md5-key — Character string
•
sha-key — Character string
•
• priv-des — The CBC-DES Symmetric Encryption privacy level. Enter a
password.
• priv-des-key — The CBC-DES Symmetric Encryption privacy level. The
user should enter a pregenerated MD5 or SHA key depending on the
authentication level selected.
des-key — The pregenerated DES encryption key. Length is determined by
•
authentication method selected
Authentication is selected, 40 hex characters if SHA Authentication is
selected.
Default Configuration
No user entry exists.
Command Mode
Global Configuration mode
User Guidelines
If the SNMP local engine ID is changed, configured users will no longer be
able to connect and will need to be reconfigured.
1630
SNMP Commands
length 32 hex characters.
—
length 40 characters.
—
32 hex characters if MD5
—